News
Login / Logout Search
By Product # Actox
about us products products resources my account shopping cart help center contact us

    Products  


ACLU011 / ACLU011R



ACLU011 / ACLU011R - Universal LNB / LNA Redundancy Controller   
Model

This unit features:

Ku, C, Ka or X-Band source 1:1 redundant system

Monitor and control the status of LNBs / LNAs via built-in RS-232/485/422

Operate in automatic or changeover mode

Display status information of unit in the receive chains

Manual and automatic operation of the receive chains

Visual indications of the “on line” chain for recieve systems

Visual indication (latching) of chain alarms

Remote M&C of chain changeover and unit funtions via RS-232/485/422 built in. TSP/IP Ethernet interface (optional)

LNB / LNA power supply voltage regulation and current fault protection

Internal switchable high stability (10-8) 10MHz reference (optional)

Suitable for multi L.O. LNBs, passes 22KHz tone

LNB / LNA RB temperature monitoring

Redundancy  /  Outdoor   Manufacturer: Actox
Zoom In image Download full description in PDF format  Print page    Email this page to a friend(s)
  Price:  Contact Us
     EXIT  
  Availability:  Contact Us


Specification
Specification
Untitled Parameter

Parameter

Value

Monitoring & controlling

Local / Remote

Methods of switching

LNB/A power supply voltage

LNB/A power supply current

Auto/Manual/physically Rotating SW
Adjustable, 12V-24V (over remote protocol)
0.6 amps max.

LNB’s nominal supply current adjust

100 mA to 600 mA

LNB’s current alarm window width

±5% to ±25% of nominal; software selectable in 5% steps

Switchover time

100 msec

IF input / output impedance / connector

50ohms – N-type Female or F-type Female

IF bandwidth

950 MHz – 2150 MHz

IF insertion loss

3 dB typ

Serial I/O: interface

RS-232: RS-422: RS-485 – Ethernet optional

RF WG switch actuating voltage

12-24 VDC (Depends on waveguide switch)

Parameter

Value

DC input

12 - 55 V

LNB status alarms

Front panel LED indicators glow green when all OK, red when an LNB fault is detected

Unit buttons and indicators

Buttons are used to manually switch the LNBs. LED indicators show which LNBs are switched on-line. Red LEDs indicate faulted LNB

Auto/Manual switch and indicators

In auto mode, an LNB failure initiates the automatic switchover to the standby LNB. In manual mode, the online LNB can be selected from the front panel

Remote/Local switch and indicators

Selects either local or remote control from manual switch on front of serial interface.

Dimensions

214 (L) x 188 (W) x 56.5 (H) mm
8.4” (L) x 7.4” (W) x 2.2” (H)

Weight

2.6 kg (5.7lbs) max.



   About Us   |  Products   |  All Products   |  Products Resources   |  My Account   |  Shopping Cart   |  Help Center   |  Contact Us  
       © Actox.com, 2000-. All right reserved.    Actox Home   |  Legal Disclaimer   |  Site Map