Parameter

Value

Monitoring & controlling

Local / Remote

Methods of switching

LNB/A power supply voltage

LNB/A power supply current

Auto/Manual/physically Rotating SW
Adjustable, 12V-24V (over remote protocol)
0.6 amps max.

LNB’s nominal supply current adjust

100 mA to 600 mA

LNB’s current alarm window width

±5% to ±25% of nominal; software selectable in 5% steps

Switchover time

100 msec

IF input / output impedance / connector

50ohms – N-type Female or F-type Female

IF bandwidth

950 MHz – 1700 MHz

IF insertion loss

3 dB typ

Serial I/O: interface

RS-232: RS-422: RS-485 – Ethernet optional

Parameter

Value

RF WG switch actuating voltage

24 VDC

AC input

LNB status alarms

Front panel LED indicators glow green when all OK, red when an LNB fault is detected

Unit buttons and indicators

Auto/Manual switch and indicators

In auto mode, an LNB failure initiates the automatic switchover to the standby LNB. In manual mode, the online LNB can be selected from the front panel

Remote/Local switch and indicators

Selects either local or remote control from manual switch on front of serial interface.

Dimensions

11.81" (300 mm) W x 7.87" (200 mm) H x 1.97" (50 mm) D; (3.0 kg)